Extrusion Tolerances: Straightness, Twist and Wall Thickness Explained
Out-of-tolerance profiles fail at assembly, not at inspection. A practical guide to the tolerances that decide whether your extrusion order actually works.
Technical Guide
Technical Guide
Machining Aluminium Profiles: Cutting, Drilling and CNC Finishing
Cut-to-length is just the start. How cutting, drilling, tapping and CNC machining turn a raw extrusion into a ready-to-assemble part – and why one-stop sourcing wins.
Industry Trends
5G and Data Centers Are Getting Hotter: The Aluminium Heat Sink Opportunity
5G base stations draw up to 4x the power of 4G, and AI servers push power density higher every year. Extruded aluminium heat sinks are the quiet workhorse behind both.
Application Guide
Building Automation Lines with Aluminium Profiles: Frames, Conveyors and Guards
T-slots, standard connectors, endless reconfiguration — why extruded aluminium is the modular backbone of modern automation equipment.
Buying Guide
How Aluminium Extrusions Are Packed and Shipped: A Buyer’s Guide
Anodised surfaces, long lengths, ocean freight — how aluminium profiles reach you without a scratch. A practical guide to packing, loading and shipping.
Industry Trends
Electric Vehicles Run on Aluminium: EV Thermal Management Explained
Motors, inverters, battery packs — every EV is a thermal management challenge. Here is where extruded aluminium profiles do the heavy lifting.
Application Guide
Aluminium Extrusions in Solar PV: Frames, Mounting and Racking Explained
From module frames to ground-mount racking, extruded aluminium is the backbone of solar infrastructure. What buyers should specify — and why.
Technical Guide
Heat Sink Design Basics: Thermal Resistance, Fin Geometry and Sizing
From the resistance chain to fin spacing — a practical engineering guide to specifying extruded heat sinks that actually meet their temperature targets.
Application Guide
LED Heat Sinks 101: Why Aluminium Profiles Keep Your Luminaires Alive
Junction temperature decides LED lifetime. Here is why extruded aluminium heat sinks are the standard choice for LED lighting — and how to specify yours.
Materials
6063 vs 6061 vs 6060: Which Aluminium Alloy Should You Specify?
Strength, extrudability, finishing and cost differ more than you think. A practical comparison of the three most common extrusion alloys for heat sinks and industrial profiles.